The Notes

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Sky Broadband User Credential Extraction ======
Sky broadband embed user login credential in their routers. If you want to use a third-party router, you have to use Wireshark to sniff it out[(http://www.skyuser.co.uk/forum/sky-router/55168-extract-username-password-sr102.html) (https://www.youtube.com/watch?v=BdcsmYX7eEQ)]. Here is a summary of what you have to do:
  - Connect to your SkyHub using an RJ45 cable. 
  - Fire up Wireshark, set capture filter to "udp port 67 or udp port 68".
  - Unplug the RJ11 (DSL) cable.
  - Copy the captured packet as printable plaintext.
  - You will see a string that looks like "xxxxxxxxxxxx@skydsl|yyyyyyyy". Your username is xxxxxxxxxxxx@skydsl, and your password is yyyyyyyy.

The modulation settings should be[(http://forums.digitalspy.co.uk/showthread.php?t=2033907)]:

^VPI | 0 |
^VCI | 38 |
^Multiplexing | VC-BASED |
^MTU | 1500 |

===== Getting it to work with OpenWRT =====
The whole point of extracting user credential is to make it work with OpenWRT. You might want this[(http://wiki.openwrt.org/doc/uci/network#pppoa_adsl_internet_connection)]. Please note that there are apparently two ADSL annexes[(http://wiki.openwrt.org/toh/buffalo/wbmr-hp-g300h#configure_adsl)].

Finally you definitely want to **delete** all the existing ATM bridges. Otherwise your ADSL won't connect. 

===== References =====
~~REFNOTES~~