Sky broadband embed user login credential in their routers. If you want to use a third-party router, you have to use Wireshark to sniff it out1). Here is a summary of what you have to do:
The modulation settings should be2):
VPI | 0 |
---|---|
VCI | 38 |
Multiplexing | VC-BASED |
MTU | 1500 |
The whole point of extracting user credential is to make it work with OpenWRT. You might want this3). Please note that there are apparently two ADSL annexes4).
Finally you definitely want to delete all the existing ATM bridges. Otherwise your ADSL won't connect.