User Tools

Site Tools


public:setting_up_raspberry_pi_zero_on_otg_mode

Setting up Raspberry Pi Zero on OTG mode

Raspberry Pi Zeros are brilliant. By running them in Ethernet OTG mode, you literally only need a Micro-USB cable to control them. The guide to follow is this one, you literally follow them verbatim. However if you want to have stable MAC address, you need the following kernel options in ''/boot/cmdline.txt:

g_ether.host_addr=72:8d:1f:c4:e8:ca g_ether.dev_addr=46:10:3a:b3:af:d9
public/setting_up_raspberry_pi_zero_on_otg_mode.txt · Last modified: 2018/03/31 00:38 (external edit)